Select your language
Select your language
„Take a look at our production facility in Oberdischingen and discover the precision with which we manufacture our hardness testers.“
Ø 35 – 42 mm
Plate-shaped samples with at least 6 mm thickness
0.1 Shore / 0,1 mg
Hardness and density determination of soft rubber, elastomers, natural rubber products etc.
Power supply: 100 – 240 V; 50 – 60Hz; 10 A
Operating period: 24/7
Protection type; IP 30
Measurements: 900 x 700 x 1000 mm
Weight: 900 x 700 x 1000
Data logger: 50 internal
Compressed air: 4 – 6 bar
Sample throughput: HDA 120: 50 / h
Sample feeding: HDA 120: 1 – 20 Proben
Ethernet
NMI = National Metrological Institute
Metrological traceability (VIM 2.41): Property of a measurement result, whereby the result can be traced back to a reference, through a documented, uninterrupted chain of calibrations, each of which contributing to the measurement uncertainty.
In accordance with the calibration rhythm you have set, you will receive an automatic reminder that your hardness tester has to be calibrated soon, as a special service from our company. With the purchase of a new device, this reminder is initially sent annually, but it can be set at a specific interval you desire. You will usually receive the reminder approximately one month before the due date.
When it comes to determining the calibration rhythm, an optimum should be found between the calibration costs and the error costs.
We are happy to answer any questions you might have about hardness testing!
Telephone +49 7305 9642-0
Fax +49 7305 9642-22
Email
Opening hours:
Monday – Thursday: 07.00 a.m. - 16.00 p.m.
Friday: 07.00 a.m. - 12.00 p.m.
Combined hardness-density machine with PLC and touchscreen to determine the hardness and density of flat test specimens made of rubber-elastic, non-cellular plastics, elastomers and other rubber products.
Ø 35 – 42 mm
Plate-shaped samples with at least 6 mm thickness
0.1 Shore / 0,1 mg
Hardness and density determination of soft rubber, elastomers, natural rubber products etc.
Power supply: 100 – 240 V; 50 – 60Hz; 10 A
Operating period: 24/7
Protection type; IP 30
Measurements: 900 x 700 x 1000 mm
Weight: 900 x 700 x 1000
Data logger: 50 internal
Compressed air: 4 – 6 bar
Sample throughput: HDA 120: 50 / h
Sample feeding: HDA 120: 1 – 20 Proben
Ethernet
NMI = National Metrological Institute
Metrological traceability (VIM 2.41): Property of a measurement result, whereby the result can be traced back to a reference, through a documented, uninterrupted chain of calibrations, each of which contributing to the measurement uncertainty.
In accordance with the calibration rhythm you have set, you will receive an automatic reminder that your hardness tester has to be calibrated soon, as a special service from our company. With the purchase of a new device, this reminder is initially sent annually, but it can be set at a specific interval you desire. You will usually receive the reminder approximately one month before the due date.
When it comes to determining the calibration rhythm, an optimum should be found between the calibration costs and the error costs.
We are happy to answer any questions you might have about hardness testing!
Telephone +49 7305 9642-0
Fax +49 7305 9642-22
Email service@bareiss.de
Opening hours:
Monday – Thursday: 07.00 a.m. - 16.00 p.m.
Friday: 07.00 a.m. - 12.00 p.m.
Downloads
„Take a look at our production facility in Oberdischingen and discover the precision with which we manufacture our hardness testers.“
Request a quote
