Select your language
Select your language
„Take a look at our production facility in Oberdischingen and discover the precision with which we manufacture our hardness testers.“
100 x 100 x 50mm
0.1
Method for confirming the rebound elasticity of polymeric foams.
Power supply: Plug-in power supply Input: 100 – 240 VAC; 50 / 60 Hz
Protection type: Electronic unit: IP 30;
Downpipe IP 20
Measurements: Test stand: 200 x 250 x 600 mm
Electronic unit: 200 x 171 x 90 mm
Weight: Test stand: 9,0 kg
Basic equipment
Test stand with a downpipe of 500 mm combined with an electronic unit. The 2-line LC display shows the measuring value and the median value in %. The rebound height is electronically determined through sensors.
RS232
NMI = National Metrological Institute
Metrological traceability (VIM 2.41): Property of a measurement result, whereby the result can be traced back to a reference, through a documented, uninterrupted chain of calibrations, each of which contributing to the measurement uncertainty.
In accordance with the calibration rhythm you have set, you will receive an automatic reminder that your hardness tester has to be calibrated soon, as a special service from our company. With the purchase of a new device, this reminder is initially sent annually, but it can be set at a specific interval you desire. You will usually receive the reminder approximately one month before the due date.
When it comes to determining the calibration rhythm, an optimum should be found between the calibration costs and the error costs.
We are happy to answer any questions you might have about hardness testing!
Telephone +49 7305 9642-0
Fax +49 7305 9642-22
Email
Opening hours:
Monday – Thursday: 07.00 a.m. - 16.00 p.m.
Friday: 07.00 a.m. - 12.00 p.m.
Digital measuring device with downpipe, sensors and connected electronic unit for determining the ball rebound resilience through the free fall of a ball on soft, elastic, polymeric foam materials.
100 x 100 x 50mm
0.1
Method for confirming the rebound elasticity of polymeric foams.
Power supply: Plug-in power supply Input: 100 – 240 VAC; 50 / 60 Hz
Protection type: Electronic unit: IP 30;
Downpipe IP 20
Measurements: Test stand: 200 x 250 x 600 mm
Electronic unit: 200 x 171 x 90 mm
Weight: Test stand: 9,0 kg
Basic equipment
Test stand with a downpipe of 500 mm combined with an electronic unit. The 2-line LC display shows the measuring value and the median value in %. The rebound height is electronically determined through sensors.
RS232
NMI = National Metrological Institute
Metrological traceability (VIM 2.41): Property of a measurement result, whereby the result can be traced back to a reference, through a documented, uninterrupted chain of calibrations, each of which contributing to the measurement uncertainty.
In accordance with the calibration rhythm you have set, you will receive an automatic reminder that your hardness tester has to be calibrated soon, as a special service from our company. With the purchase of a new device, this reminder is initially sent annually, but it can be set at a specific interval you desire. You will usually receive the reminder approximately one month before the due date.
When it comes to determining the calibration rhythm, an optimum should be found between the calibration costs and the error costs.
We are happy to answer any questions you might have about hardness testing!
Telephone +49 7305 9642-0
Fax +49 7305 9642-22
Email service@bareiss.de
Opening hours:
Monday – Thursday: 07.00 a.m. - 16.00 p.m.
Friday: 07.00 a.m. - 12.00 p.m.
Downloads
„Take a look at our production facility in Oberdischingen and discover the precision with which we manufacture our hardness testers.“
Request a quote
