Select your language
Select your language
„Take a look at our production facility in Oberdischingen and discover the precision with which we manufacture our hardness testers.“
Plate-shaped samples with at least 6 mm thickness
Cylindrical samples
0.1 Shore
The HPE III registers humidity, environmental and sample temperature.
The hardness tester is used for testing the hardness of composite materials, cellular plastics, elastomers and plastics. For a reliable hardness testing, according to the standard, a smooth and even sample with a diameter of >= 35 mm and a material thickness of >=6 mm is required.
Power supply: Lithium-Ionen Akku
Operating period: up to 30 Stunden
Protection type: IP 50
Measurements: 153 x 67 x 43 mm
Weight: 0,3 kg
RS-232 cable with USB connection for data transfer and charging
NMI = National Metrological Institute
Metrological traceability (VIM 2.41): Property of a measurement result, whereby the result can be traced back to a reference, through a documented, uninterrupted chain of calibrations, each of which contributing to the measurement uncertainty.
In accordance with the calibration rhythm you have set, you will receive an automatic reminder that your hardness tester has to be calibrated soon, as a special service from our company. With the purchase of a new device, this reminder is initially sent annually, but it can be set at a specific interval you desire. You will usually receive the reminder approximately one month before the due date.
When it comes to determining the calibration rhythm, an optimum should be found between the calibration costs and the error costs.
We are happy to answer any questions you might have about hardness testing!
Telephone +49 7305 9642-0
Fax +49 7305 9642-22
Email
Opening hours:
Monday – Thursday: 07.00 a.m. - 16.00 p.m.
Friday: 07.00 a.m. - 12.00 p.m.
Digital premium handheld hardness tester for the Shore hardness measurement with illuminated display, sensors for the recording of environmental conditions and integrated compression sleeve for vertical support and standard contact pressure.
Plate-shaped samples with at least 6 mm thickness
Cylindrical samples
0.1 Shore
The HPE III registers humidity, environmental and sample temperature.
The hardness tester is used for testing the hardness of composite materials, cellular plastics, elastomers and plastics. For a reliable hardness testing, according to the standard, a smooth and even sample with a diameter of >= 35 mm and a material thickness of >=6 mm is required.
Power supply: Lithium-Ionen Akku
Operating period: up to 30 Stunden
Protection type: IP 50
Measurements: 153 x 67 x 43 mm
Weight: 0,3 kg
RS-232 cable with USB connection for data transfer and charging
NMI = National Metrological Institute
Metrological traceability (VIM 2.41): Property of a measurement result, whereby the result can be traced back to a reference, through a documented, uninterrupted chain of calibrations, each of which contributing to the measurement uncertainty.
In accordance with the calibration rhythm you have set, you will receive an automatic reminder that your hardness tester has to be calibrated soon, as a special service from our company. With the purchase of a new device, this reminder is initially sent annually, but it can be set at a specific interval you desire. You will usually receive the reminder approximately one month before the due date.
When it comes to determining the calibration rhythm, an optimum should be found between the calibration costs and the error costs.
We are happy to answer any questions you might have about hardness testing!
Telephone +49 7305 9642-0
Fax +49 7305 9642-22
Email service@bareiss.de
Opening hours:
Monday – Thursday: 07.00 a.m. - 16.00 p.m.
Friday: 07.00 a.m. - 12.00 p.m.
Downloads
„Take a look at our production facility in Oberdischingen and discover the precision with which we manufacture our hardness testers.“
Request a quote
