Select your language
Select your language
„Take a look at our production facility in Oberdischingen and discover the precision with which we manufacture our hardness testers.“
O-rings
Sheet material
Workpieces and thin samples
0.1
-40 °C to +170 °C
In rubber and plastic production as well as in quality control, there has now been a move towards performing hardness tests on finished parts instead of standard samples. The digi test II works fully automatically and is therefore largely operator-independent. The measuring devices are used to determine the hardness of all elastic materials, polymers and elastomers.
Power supply: 100 – 240 VAC; 50 / 60 Hz
Protection type: IP 20
Measurements: Test stand: 200 x 250 x 570 mm
Electronic unit: 260 x 260 x 11 mm
Weight: Test stand: 14,0 kg
Electronic unit: 2,5 kg
USB and RS 232 interfaces for data transfer
NMI = National Metrological Institute
Metrological traceability (VIM 2.41): Property of a measurement result, whereby the result can be traced back to a reference, through a documented, uninterrupted chain of calibrations, each of which contributing to the measurement uncertainty.
In accordance with the calibration rhythm you have set, you will receive an automatic reminder that your hardness tester has to be calibrated soon, as a special service from our company. With the purchase of a new device, this reminder is initially sent annually, but it can be set at a specific interval you desire. You will usually receive the reminder approximately one month before the due date.
When it comes to determining the calibration rhythm, an optimum should be found between the calibration costs and the error costs.
We are happy to answer any questions you might have about hardness testing!
Telephone +49 7305 9642-0
Fax +49 7305 9642-22
Email
Opening hours:
Monday – Thursday: 07.00 a.m. - 16.00 p.m.
Friday: 07.00 a.m. - 12.00 p.m.
High-quality temperature control or climatic chamber in conjunction with the proven hardness tester digi test II, rotation table and software with database function, for serial testing of the hardness of polymers according to Shore A, D or IRHD N, depending on the temperature.
O-rings
Sheet material
Workpieces and thin samples
0.1
-40 °C to +170 °C
In rubber and plastic production as well as in quality control, there has now been a move towards performing hardness tests on finished parts instead of standard samples. The digi test II works fully automatically and is therefore largely operator-independent. The measuring devices are used to determine the hardness of all elastic materials, polymers and elastomers.
Power supply: 100 – 240 VAC; 50 / 60 Hz
Protection type: IP 20
Measurements: Test stand: 200 x 250 x 570 mm
Electronic unit: 260 x 260 x 11 mm
Weight: Test stand: 14,0 kg
Electronic unit: 2,5 kg
USB and RS 232 interfaces for data transfer
NMI = National Metrological Institute
Metrological traceability (VIM 2.41): Property of a measurement result, whereby the result can be traced back to a reference, through a documented, uninterrupted chain of calibrations, each of which contributing to the measurement uncertainty.
In accordance with the calibration rhythm you have set, you will receive an automatic reminder that your hardness tester has to be calibrated soon, as a special service from our company. With the purchase of a new device, this reminder is initially sent annually, but it can be set at a specific interval you desire. You will usually receive the reminder approximately one month before the due date.
When it comes to determining the calibration rhythm, an optimum should be found between the calibration costs and the error costs.
We are happy to answer any questions you might have about hardness testing!
Telephone +49 7305 9642-0
Fax +49 7305 9642-22
Email service@bareiss.de
Opening hours:
Monday – Thursday: 07.00 a.m. - 16.00 p.m.
Friday: 07.00 a.m. - 12.00 p.m.
Downloads
„Take a look at our production facility in Oberdischingen and discover the precision with which we manufacture our hardness testers.“
Request a quote
