- Product Overview
- Industry sectors
- Accredited service
- ISO 17025 calibration
- Manufacturer & calibration laboratory
- Rental device & contract measurement
- Seminars & training
- Support & infos
- Company
Select your language
Select your language
The BaRotation was specifically developed for the routine testing of O-rings. With the test system, it is possible to measure O-rings and other components automatically using the IRHD Micro and Micro Shore A measurement mehtods. Through the laser detection of the specimen, measurement of hardness and, if necessary, thickness measuring are performed at the desired position. It is arbitary whether the test should take place at the highest position or the centered position of the string thickness. The automated measuring process reduces user influence to a minimum.
The automated measuring process avoids manual, time-consuming sample placement and enables unmanned routine testing with reliable measurement results.
Time saving thanks to routine testing
The multiple function of the BaRotation allows generating measured values for multiple samples in one measurement process. One or two measuremets per O-ring are possible.
Measuring device IRHD Micro or Micro Shore A
Mounting arm
Electronic unit
Operating manual
Experience a seamless adjustment process
When changing the measuring device, it is necessary to adjust the distance between the tip of the indenter and the laser beam. With the BaRotation, this adjustment can be automated at the push of a button, significantly reducing the potential for human errors.
High-precision measuring position thanks to laser
A high-precision laser is integrated to find the measuring position of the sample that is compliant with the standards. The centering of the sample is done automatically and independently of the operator below the measuring device.
Measurements according to differnt testing methods
Exchangable measuring devices enable an easy switch between IRHD Micro and Micro Shore A without tools and with just a few hand movements.
Measurement of hardness and thickness measuring in one system
With the BaRotation, it is possible to determine the thickness in addition to the hardness of the sample. Through the 2-in-1 measurement method, a step in determining or verifying the specifications can be saved.
O-rings, molded parts, round components
Measuring device IRHD Micro
(or Shore A)
Measuring device Shore A
(or IRHD Micro)
Reference blocks
with DAkkS accredited calibration certificate
Plate-shaped test specimens minimum 0.7 mm depending on the measurement method
Small O-rings and prefabricated parts with a radius of curvature greater than 0.8 mm
Cord thickness from/to: 1,5-10 mm
0.1 hardness units; 0,01 mm thickness measurement
Test stand
Dim. W x H x D: 45 x 39 x 55 cm
Weight: 21,00 kg
With pick-up bracket and measuring device
Dim. W x H x D: 45 x 39 x 55 cm
Weight: 23,71 kg
Elektronic unit
Dim. W x H x D: min. 26 x 11,5 x 26,5 cm
max. 26 x 11,5 x 34 cm
Weight: 2,32 kg
Power supply: 100-24 VAC; 50/60 Hz
Protection class: IP 20
Laser class: 2
USB and RS-232 Schnittstelle for data transfer (software required).
Traceability refers to the ability to monitor the origin, progress and history of our products, calibrations, processes, or measurements. This means that all steps and parameters that contribute to the creation of our products must be documented and traceable.
Traceability ensures the transparency, integrity and reliability of data and enables the checking of quality standards. It plays a crucial role in error detection, quality control and ensuring compliance with legal requirements and our quality standards.
DAkkS-accredited laboratory since 1996 – Calibrations meeting the highest requirements and global standards.
Calibration reminders – We automatically remind you of your next calibration.
Service packages – Accredited calibration including maintenance and repair at a fixed price. Everything from a single source.
Trust Bareiss for reliable calibrations and accurate measurement results.
Benefit from our experience as a manufacturer and accredited calibration laboratory.
Bareiss recommendation: Laboratory conditions according to DIN ISO 23529
We are happy to answer any questions you might have about hardness testing!
Phone+49 7305 9642-0
Fax +49 7305 9642-22
Email
Operating hours:
Monday - Thursday: 07.00 - 16.00 Uhr
Friday: 07.00 - 12.00 Uhr
Automated hardness test system for O-rings according to IRHD Micro and Micro Shore A.
Bareiss Silverline 25
New colors, lived responsibility – coatings for a better future
The transition to the new coating will begin mid-year. During the transition period, some devices may still be delivered with previous coating. We kindly ask for your understanding that the new coating cannot be guaranteed.
Automated hardness test system for O-rings according to IRHD Micro and Micro Shore A.
Bareiss Silverline 25
New colors, lived responsibility – coatings for a better future
The transition to the new coating will begin mid-year. During the transition period, some devices may still be delivered with previous coating. We kindly ask for your understanding that the new coating cannot be guaranteed.
O-rings, molded parts, round components
Plate-shaped test specimens minimum 0.7 mm depending on the measurement method
Small O-rings and prefabricated parts with a radius of curvature greater than 0.8 mm
Cord thickness from/to: 1,5-10 mm
0.1 hardness units; 0,01 mm thickness measurement
Test stand
Dim. W x H x D: 45 x 39 x 55 cm
Weight: 21,00 kg
With pick-up bracket and measuring device
Dim. W x H x D: 45 x 39 x 55 cm
Weight: 23,71 kg
Elektronic unit
Dim. W x H x D: min. 26 x 11,5 x 26,5 cm
max. 26 x 11,5 x 34 cm
Weight: 2,32 kg
Power supply: 100-24 VAC; 50/60 Hz
Protection class: IP 20
Laser class: 2
USB and RS-232 Schnittstelle for data transfer (software required).
Traceability refers to the ability to monitor the origin, progress and history of our products, calibrations, processes, or measurements. This means that all steps and parameters that contribute to the creation of our products must be documented and traceable.
Traceability ensures the transparency, integrity and reliability of data and enables the checking of quality standards. It plays a crucial role in error detection, quality control and ensuring compliance with legal requirements and our quality standards.
DAkkS-accredited laboratory since 1996 – Calibrations meeting the highest requirements and global standards.
Calibration reminders – We automatically remind you of your next calibration.
Service packages – Accredited calibration including maintenance and repair at a fixed price. Everything from a single source.
Trust Bareiss for reliable calibrations and accurate measurement results.
Benefit from our experience as a manufacturer and accredited calibration laboratory.
Bareiss recommendation: Laboratory conditions according to DIN ISO 23529
We are happy to answer any questions you might have about hardness testing!
Phone+49 7305 9642-0
Fax +49 7305 9642-22
Email sales@bareiss.de
Operating hours:
Monday - Thursday: 07.00 - 16.00 Uhr
Friday: 07.00 - 12.00 Uhr
The BaRotation was specifically developed for the routine testing of O-rings. With the test system, it is possible to measure O-rings and other components automatically using the IRHD Micro and Micro Shore A measurement mehtods. Through the laser detection of the specimen, measurement of hardness and, if necessary, thickness measuring are performed at the desired position. It is arbitary whether the test should take place at the highest position or the centered position of the string thickness. The automated measuring process reduces user influence to a minimum.
The automated measuring process avoids manual, time-consuming sample placement and enables unmanned routine testing with reliable measurement results.
Time saving thanks to routine testing
The multiple function of the BaRotation allows generating measured values for multiple samples in one measurement process. One or two measuremets per O-ring are possible.
Experience a seamless adjustment process
When changing the measuring device, it is necessary to adjust the distance between the tip of the indenter and the laser beam. With the BaRotation, this adjustment can be automated at the push of a button, significantly reducing the potential for human errors.
High-precision measuring position thanks to laser
A high-precision laser is integrated to find the measuring position of the sample that is compliant with the standards. The centering of the sample is done automatically and independently of the operator below the measuring device.
Measurements according to differnt testing methods
Exchangable measuring devices enable an easy switch between IRHD Micro and Micro Shore A without tools and with just a few hand movements.
Measurement of hardness and thickness measuring in one system
With the BaRotation, it is possible to determine the thickness in addition to the hardness of the sample. Through the 2-in-1 measurement method, a step in determining or verifying the specifications can be saved.
Measuring device IRHD Micro or Micro Shore A
Mounting arm
Electronic unit
Operating manual
Measuring device IRHD Micro
(or Shore A)
Measuring device Shore A
(or IRHD Micro)
Reference blocks
with DAkkS accredited calibration certificate
