- Product Overview
- Industry sectors
- Accredited service
- ISO 17025 calibration
- Manufacturer & calibration laboratory
- Rental device & contract measurement
- Seminars & training
- Support & infos
- Company
Select your language
Select your language
With the Gelomat, you reliably measure the strength and hardness of gelatin capsules, nutrient solutions, or gelatinous substances. Various measuring devices enable the illustration of a wide range of tests specimens. The maximum measuring force is individually adjustable and can be adapted to the product requirements. The globally unique testing method developed by Bareiss is recognized by ISO 17025 and can be acquired with a DAkkS accredited calibration certificate.
The testing system is not only suitable for individual measurements but can also perform automated serial measurements through expansion with other positioning equipment.
In combination with Bareiss Celeste software CFR 21 Part 11 compliant
When using Gelomat in combination with our Celeste softare, tamper-proof measuring values are ensured. Furthermore, every step of procedure can be traced through user login and audittrail-function. The test record is signed by the user using an e-signature.
Test stand
Pick-up bracket for measuring device
Electronic unit
USB cable
Operating manual
Globally unique testing method for gel capsules
Our long tradition of innovations is refelected in the Gelomat: the testing method developed jointly with a customer is recognized by ISO 17025. It allows the properties of gel-like substances to be determined. Even the smallest changes in fomulations are detected and measured by our Gelomat.
Simple and intuitive operation
With our continously expanding portfolio of sample templates to ensure correct positioning during testing, we offer the perfect solution for simple hardness testing of gel capsules.
Time savings through serial measurement
The Gelomat's multiple measurement function allows generating measuring values on multiple samples in one measurement process.
Other features
Flexible materials such as gelatin, gelatin capsules, gel nutrient solutions, modeling clay, nutrient media, jam, paraffin, etc.
Measuring device 0-20 N oder 0-2 N
Centrofix
for positioning individual gelatin capsules
Rotofix
for automatic positioning of multiple capsules
DAkkS accredited calibration certificate
DAkkS accredited standard block
for 0-20 N or 0-2 N
3Q-Report Qualification
Free forms
0,1 N for measurement method 0-20 N
0,01 N for measuring method 0-2 N
Test stand
Dim. W x H x D: 20 x 55 x 25 cm
Weight: 9,00 kg
With pick-up bracket and measuring device
Dim. W x H x D: min. 20 x 55 x 25 cm
max. 20 x 60 x 31 cm
Weight: 15,60 kg
Electronic unit
Dim. W x H x D: min. 26 x 11,5 x 26,5 cm
max. 26 x 11,5 x 34 cm
Weight: 2,32 kg
Pick-up bracket
Dim. W x H x D: 11,5 x 12,5 x 17 cm
Weight: 1,99 kg
Power supply: 100-240 VAC; 50/60 Hz
Protection class: IP 50
Safety fuse: 2 pieces microfuse 3.15 A, 5x20 mm, Fuse Speed T
Power drain: max. 20 VA
USB or RS-232 interfaces for data transmission (software required)
Traceability refers to the ability to monitor the origin, progress and history of our products, calibrations, processes, or measurements. This means that all steps and parameters that contribute to the creation of our products must be documented and traceable.
Traceability ensures the transparency, integrity and reliability of data and enables the checking of quality standards. It plays a crucial role in error detection, quality control and ensuring compliance with legal requirements and our quality standards.
DAkkS-accredited laboratory since 1996 – Calibrations meeting the highest requirements and global standards.
Calibration reminders – We automatically remind you of your next calibration.
Service packages – Accredited calibration including maintenance and repair at a fixed price. Everything from a single source.
Trust Bareiss for reliable calibrations and accurate measurement results.
Benefit from our experience as a manufacturer and accredited calibration laboratory.
Bareiss recommendation: Laboratory conditions according to DIN ISO 23529
We are happy to answer any questions you might have about hardness testing!
Phone +49 7305 9642-0
Fax +49 7305 9642-22
Email
Opening hours:
Monday - Thursday 07:00 - 16:00
Friday: 07:00 - 12:00
Testing device for fully automated hardness and strength test on gelatin capsules, gel nutrient solutions, and other flexible materials.
Free forms
0,1 N for measurement method 0-20 N
0,01 N for measuring method 0-2 N
Test stand
Dim. W x H x D: 20 x 55 x 25 cm
Weight: 9,00 kg
With pick-up bracket and measuring device
Dim. W x H x D: min. 20 x 55 x 25 cm
max. 20 x 60 x 31 cm
Weight: 15,60 kg
Electronic unit
Dim. W x H x D: min. 26 x 11,5 x 26,5 cm
max. 26 x 11,5 x 34 cm
Weight: 2,32 kg
Pick-up bracket
Dim. W x H x D: 11,5 x 12,5 x 17 cm
Weight: 1,99 kg
Power supply: 100-240 VAC; 50/60 Hz
Protection class: IP 50
Safety fuse: 2 pieces microfuse 3.15 A, 5x20 mm, Fuse Speed T
Power drain: max. 20 VA
USB or RS-232 interfaces for data transmission (software required)
Traceability refers to the ability to monitor the origin, progress and history of our products, calibrations, processes, or measurements. This means that all steps and parameters that contribute to the creation of our products must be documented and traceable.
Traceability ensures the transparency, integrity and reliability of data and enables the checking of quality standards. It plays a crucial role in error detection, quality control and ensuring compliance with legal requirements and our quality standards.
DAkkS-accredited laboratory since 1996 – Calibrations meeting the highest requirements and global standards.
Calibration reminders – We automatically remind you of your next calibration.
Service packages – Accredited calibration including maintenance and repair at a fixed price. Everything from a single source.
Trust Bareiss for reliable calibrations and accurate measurement results.
Benefit from our experience as a manufacturer and accredited calibration laboratory.
Bareiss recommendation: Laboratory conditions according to DIN ISO 23529
We are happy to answer any questions you might have about hardness testing!
Phone +49 7305 9642-0
Fax +49 7305 9642-22
Email sales@bareiss.de
Opening hours:
Monday - Thursday 07:00 - 16:00
Friday: 07:00 - 12:00
With the Gelomat, you reliably measure the strength and hardness of gelatin capsules, nutrient solutions, or gelatinous substances. Various measuring devices enable the illustration of a wide range of tests specimens. The maximum measuring force is individually adjustable and can be adapted to the product requirements. The globally unique testing method developed by Bareiss is recognized by ISO 17025 and can be acquired with a DAkkS accredited calibration certificate.
The testing system is not only suitable for individual measurements but can also perform automated serial measurements through expansion with other positioning equipment.
In combination with Bareiss Celeste software CFR 21 Part 11 compliant
When using Gelomat in combination with our Celeste softare, tamper-proof measuring values are ensured. Furthermore, every step of procedure can be traced through user login and audittrail-function. The test record is signed by the user using an e-signature.
Globally unique testing method for gel capsules
Our long tradition of innovations is refelected in the Gelomat: the testing method developed jointly with a customer is recognized by ISO 17025. It allows the properties of gel-like substances to be determined. Even the smallest changes in fomulations are detected and measured by our Gelomat.
Simple and intuitive operation
With our continously expanding portfolio of sample templates to ensure correct positioning during testing, we offer the perfect solution for simple hardness testing of gel capsules.
Time savings through serial measurement
The Gelomat's multiple measurement function allows generating measuring values on multiple samples in one measurement process.
Other features
Test stand
Pick-up bracket for measuring device
Electronic unit
USB cable
Operating manual
Measuring device 0-20 N oder 0-2 N
Centrofix
for positioning individual gelatin capsules
Rotofix
for automatic positioning of multiple capsules
DAkkS accredited calibration certificate
DAkkS accredited standard block
for 0-20 N or 0-2 N
3Q-Report Qualification
